Adjustable smart sunglasses
Smart Electrochromic Sunglasses Functions
1.Smart electrochromic function
Lenses blackness change automatically with the intensity of ambient lights, and it is divided into four levels from light to deep blackness which makes the eye always maintain a relatively comfortable stage and not easy to become tired.
2. Rapid electrochromic function
The response time from first gear to other gear or from other gear to first gear is about 0.1 second. And it can make sure that the eye will not become dazzled or blind temporarily when the light changes suddenly (such as driving into and out of a tunnel), in order to ensure a safe driving.
3.Anti UV and anti-blue light function
The lens of this product is liquid crystal polarizing lens. The surface of the lens is attached with double-aver anti UV polarizer, which can filter out ultraviolet light with wavelength<365 nm and blocking rate >99%. It also has anti blue light function. This function is suitable for daily wear in high ultraviolet environment and blue light environment.
4. Polarization function.
The lens of this product has all the functions of polarizer, such as anti-glare, anti-rod reflection light, anti-water surface scale light, because it uses double polarizer and 0 degree polarization. This function is suitable for driving, fishing, traveling, outdoor sports and daily wear.
5.High light transmittance of traffic signal
The lens of this product blocks UVA, UVB and strong visible light, at the same time, the red, yellow and green light transmittance of traffic signal lamp is higher than the national standard value, which will not affect the identification of traffic signal.
Smart electrochromic sunglasses add the Al intelligent design in the intelligent control circuit. Even if driving or riding on the dense avenues the mottled light and shadow will not make the glasses flicker frequently, and it can still ensure a comfortable and clear vision and effectively prevent eye fatigue.
7. Switchable Function
Three working modes:
(1) Automatic dimming mode: the default working mode after removing the wearer, Lens blackness will be automatically adjusted with the external light. The stronger the brightness of the external light is. The deeper the color change will be. The weaker the brightness of the external light is, the shallower the color change will be. This mode is suitable for driving in the car. It can change color in 0.1 seconds when going in and out of the tunnel.
(2) Manual dimming mode: the lens blackness of 4 gears can be switched circularly, and the color change blackness can be adjusted according to your own needs. This mode is suitable for outdoor wear.
(3) Blinking mode: the blinking frequency of the lens in two gears can be switched circularly the two kinds of blinking frequency are 1 gear (5 times per second) and 2 gear (10 times per second).