Transparent to Opaque film
DO NOT store material in shipping container or drum for more than 14 days.
-DO NOT exceed 65 vac +/- 5vac
-Provide a clean and dust free work environment
-Confirm that mounting surface is oil and residue free prior to installation.
-Clean the surface you are applying the material to with 99% isopropyl alcohol ONLY or greater.
-Remove the protective coating from the contact side of the material prior to installation of the Non-Adhesive film and clean the actual smart PDLC Filmand the glass with 99% isopropyl alcohol only.
-Inspect the Smart PDLC Self adhesive surface of the film for any burs or raised edges on the side that will be attached to the glass only and remove if necessary.
-Acclimate the Smart PDLC Film Self Adhesive material product to room temperature before installation and wait 24-48 hours after installation is completed for best results.
-We provide a ready to install piece of material that is pre cut to the measurements or template you provide us. Double check your measurements and templates. All cuts are final.
-Dry fit all material prior to installation.
-Remove the protective film that is on the finish side after the film has been installed.
Related posts
