Smart Shading film is a LPF/SPD electro-optical film to be used in the architectural field.
Product supply conditions:
SPD Filim Quality release limits
Inspection conditions:
• Distance = 1 m – perpendicular view
• Back Lighting: 300 – 500 Lux / white light
(400-700 nm)
• Inspection time: 10 seconds per sqm.
Single spots smaller than 1 mm are considered acceptable.
Other optical non uniformities are not considered defective if they result invisible at above inspecting conditions.
SPD Film Electrical connections:
(bus bars) are obtained by cutting sheets to the right size and subsequent bus bars application. The price of this work is included in the invoiced surface. Sheets cut to particular rectangular or other shapes , with or without bus-bars, can also be supplied on request at a case by case pricing.
Voltage Drivers/Transformers:SPD film works at 110Vac/50Hz.
We can supply many transformers based on the square meters required (to be referred to EU area, made according European standards (CE) and to be used where the voltage line is 220-230Vac-50Hz sine wave).Different voltage driving solutions are also available on request (remote control – dimming – etc.).
Notes for processing and manipulation:
1.Masking film removal should be made with care and in dust-free environment.
2.Gently remove the masking film using powder-free gloves.
3.Do not remove the transparent protective tape present on the copper of the busbars applied to the film.
Max temperature for glass lamination is 110°C for 60 minutes. Note: PU or EVA or lonomeric sheets as interilayers for glass lamination.
